Media Library / Images

DDC-V 80 F

Dry Disconnect Coupling for Epoxi resin loading - with sensor

Alternative fuels: DME Dimethyl Ester

DGC Dry Gas Coupling, EFL 16 Fluorline hose assembly

LNG Refuelling

N-LNG Nozzle, Soft-Stop-Position

Ship bunkering with LNG

Coupling of DCC male and female part DN 50; left hand side CBC 50 Cryogenic Breakaway Coupling

ERV-R

"Red Band" Rubber Expansion Joints / ship engine room

UTS hose assembly

on board of a foodstuff road tanker

HD 50 C, Carter Underwing Nozzle, Aljac Lanyard Reel

ContiTech Production ERV

Pressure impulse test

Oasis company building

DCC Dry Cryogenic Coupling for LNG

Coupling process

SG 1" 1x0 Al

Sight Glass with propeller, to EN 13617-1, DN 25, for installation between petrol station nozzle and hose assembly, or mounting on the dispenser. For the visual control of bubble-free dispensing and fuel colour (e. g. for premium fuels). Suitable for all standardised gasoline and diesel fuels according EN 589 + EN 590, including ethanol or biodiesel content, also Avgas and Jet-A1.

Fuel Grade Identification to EN 16942 standard, direct print on product badges for ZVA Nozzles

Ship loading various media - STW 150 and UTS 150 hose assemblies

Flexible bronze pipe connectors

Installed in manhole of a petrol station underground storage tank (UST). Suction pipes towards the dispenser pumps

ERV-OR

"Orange Band" Rubber Expansion Joints, road tanker

Ultra Fast Fill Quick Coupler 350 bar

for Hydrogen

Unloading road tanker

TW hose assembly, DDC Dry Disconnect Coupling

DDC-K ADR:

DDC Dust Caps with Pressure Relief Valve to ADR Requirements. These pressurized dust caps PN 10 of aluminium for DDC male adapters on road tankers are much lighter than the PN 25 versions of stainless steel.

ERV-R 1000.10

"Red Band" Rubber Expansion Joints DN 1000; wastewater pump

MannTek DDC-V & DDC-M Dry Disconnect Couplings

Rubber Expansion Joint ROTEX 80.16

ROTEX expansion joints suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative.

AKD 75 Hy

CouplingSeal CSM

GasGuard LPG nozzles: optional Magnet in the guard

For contactless activation of dispensers with reed switch technology

VB 80 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

Oasis DMI Dispenser Manifold for CNG

Elaflex Hiby Tanktechnik, Production Plettenberg / Germany

Plettenberg factory 1

MK 100-90° SS

Special type with bent lever

ERV ZS from DN 250 (PN 16)/350 (PN 10):

Tied Flanges – Type ZS, Tie rods with outer limitation in spherical discs and conical seats

Ship bunkering with LNG

DCC Dry Cryogenic Coupling with cap; CBC Cryogenic Breakaway Coupling

Ship bunkering

'Yellow Band' collapsible high