Media Library / Images

Flame resistance test hose

Colour production: manifold

UTS and FWS hose assemblies

ZV 19.1

ZV 19 manually operated dispensing nozzle, DN 19 (3/4"), for diesel, fuel, petroleum and oils (also vegetable oils) up to 100 ltr./min.

Terminal / gantry: 'Polypal Oil' hose assemblies for bottom loading of road tankers

Lining UPE - resistant to all petrochemical media, also with high content of aromatics or other aggressive additives; cover CR - oil resistant

Flame protection cover FSH for ERV rubber expansion joints

Type PCS 38 (Polypal Clean DN 38 mm)

Hose Reels electrical rewind system yellow

for water

LNG ship bunkering

DCC 100 Dry Cryogenic Coupling, CBC 100 PERC Cryogenic Breakaway Coupling

Oasis FV103 with NC203 P36, Light Duty Fill Valve and Transit Nozzle for CNG

VB 100 ADR Al with pressure relief

Plug for MK 100• Meets the ADR requirements• Enhanced safety and protects the environment• Easy, user friendly operation

AKD-Hy

Coupling seal type AKD for cam locking couplings EN 14420-7. Here: of CSM

Flexible bronze pipe connectors

Installed in suction pipe between dispenser and underground storage tank

Elapharm EPH 25 with EN 1092-1flange fitting, free of dead spaces

Terminal, TW hose assemblies and DDC Dry Disconnect Couplings

Guards for ZVA nozzles

suitable for all dispensers, world wide

Rubber Expansion Joint ROTEX 80.16

ROTEX expansion joints suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative.

Elaflex LTW hose assembly, Matterhorn

Supply of the mountain top station via IBC unloading

Manufacturing ERV flanges

Filling of Heating Oil Tanks: Adapter KR 50-21/2"

for difficult to reach filler inlets

Unloading road tanker

TW hose assembly, DDC Dry Disconnect Coupling

ERV-GR 80.16 ZS 2

GREEN BAND Rubber Expansion Joint with "ZS" limiter (tie rods with outer limitation in rubber bushings)

Slimline 21 green

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360 and EN 13483.

EA 866 scuffguard orange with ZVG 2 ACME nozzle

The scuffguard for LPG / Autogas nozzles shows the LPG fuel grade marking required by standard, and offers a large advertising space

ZVG 2 EURO UL nozzle for L.P. Gas / Autogas

with EA 866 scuffguard black and LPG 16 S hose assembly black

HD 32 C

Yellow Band' aircraft refuelling hose, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range - 30° up to + 90° Celsius. Electrical resistance between 1,000 and 1 million Ohm.

ERV-G 100 TW

Aircraft refueller

Elaflex Hamburg

Hose stock, reeling up a FEP hose

GasGuard GG11R

The GasGuard GG11 Back-Check Valve (GG11R: with additional release screw) should be standard equipment for any LPGas road tanker operator. It is used in conjunction with LPGas bulk refueling nozzles to contain leaks at storage tank fill points. If the fill point proves to be leaking when removing the nozzle it can be left on the tank until corrective action is taken. The driver can move to the next fill point without delay.

CHD 32

Lilac Band chemical hose without helix, DN 32

Elaflex Hamburg

Aerial view over the Elaflex premises